Swedish A-10s...?

[MikeKozlowski]

Apparently, they've sent out an RFQ:





Mike

[Craiglxviii]

[Micael]

There kind of was one, the Saab B3LA/ A-38. When it was cancelled the project morphed into the AMX.

[Belushi TD]

I LOVE the BJORRRRRTTTTT!

That makes it perfect!

Belushi TD

[Nightwatch2]

Apparently, they've sent out an RFQ:





Mike

Quotes are due back by April 1st, 2025?

[MikeKozlowski]

Apparently, they've sent out an RFQ:





Mike

Quotes are due back by April 1st, 2025?

Sounds good. I'm going to bid on training them to operate the ammo loaders.

Mike

[Pdf27]

Ammunition only to be fitted to the aircraft using a cheap Allen key and a slot-head screwdriver. May drop on the floor five or six times before you get it to stick properly, and can be a bit wobbly on occasion even when correctly fitted.

[MikeKozlowski]

Ammunition only to be fitted to the aircraft using a cheap Allen key and a slot-head screwdriver. May drop on the floor five or six times before you get it to stick properly, and can be a bit wobbly on occasion even when correctly fitted.

Pdf,

Not sure if they've changed it in intervening years, but IIRC only one tool was needed to fill a loader, and that was a socket wrench.

Which occasionally doubled as a hammer.

Not that I would know anything about that.

Mike

[jemhouston]

Ammunition only to be fitted to the aircraft using a cheap Allen key and a slot-head screwdriver. May drop on the floor five or six times before you get it to stick properly, and can be a bit wobbly on occasion even when correctly fitted.

Pdf,

Not sure if they've changed it in intervening years, but IIRC only one tool was needed to fill a loader, and that was a socket wrench.

Which occasionally doubled as a hammer.

Not that I would know anything about that.

Mike

At least you didn't use a screwdriver as a hammer.

[MikeKozlowski]

Ammunition only to be fitted to the aircraft using a cheap Allen key and a slot-head screwdriver. May drop on the floor five or six times before you get it to stick properly, and can be a bit wobbly on occasion even when correctly fitted.

Pdf,

Not sure if they've changed it in intervening years, but IIRC only one tool was needed to fill a loader, and that was a socket wrench.

Which occasionally doubled as a hammer.

Not that I would know anything about that.

Mike

At least you didn't use a screwdriver as a hammer.

Jem,

Not there, at least.

Mike

[jemhouston]

I won't ask, I won't tell, and I expect the same from you.

[Craiglxviii]

Ammunition only to be fitted to the aircraft using a cheap Allen key and a slot-head screwdriver. May drop on the floor five or six times before you get it to stick properly, and can be a bit wobbly on occasion even when correctly fitted.

Pdf,

Not sure if they've changed it in intervening years, but IIRC only one tool was needed to fill a loader, and that was a socket wrench.

Which occasionally doubled as a hammer.

Not that I would know anything about that.

Mike

At least you didn't use a screwdriver as a hammer.

He wasn’t an electrician, to whom <anything> is a hammer, occasionally even hammers.

[jemhouston]

I was an electronic technician / help desk support / flunky, I won't go into what I used for a hammer.